- Runs along the bottom of your door window
- Helps keep moisture, dirt, and debris from entering the cabin
- Replace when brittle or cracked
The Door Belt Molding (Right, Rear) is a section of trim around the bottom of the door window that keeps things like water, debris, and dirt from getting inside the door. The Door Belt Molding (Right, Rear) is usually made of either chrome, rubber, or plastic. If the Door Belt Molding (Right, Rear) is damaged or missing, water can get inside your Nissan's door, potentially causing damage to your Nissan. Make sure your old, damaged, or missing Door Belt Molding (Right, Rear) is replaced with a new Door Belt Molding (Right, Rear) from genuine Nissan Parts.
After some years, your vehicle's Door Belt Molding (Right, Rear) can wear out, become brittle, and even crack. Additionally, harsh elements such as road salt, snow, ice, UV rays, and even heavy rainfall could all potentially damage your Door Belt Molding (Right, Rear).
Do you need to replace the Door Belt Molding (Right, Rear) on your Nissan Sentra? Look at your existing molding first. You may see cracks on the edges of the trim or the molding may look discolored or feel hard. Additionally, roll the windows up and down, and listen for a squeaking, squealing, or chattering sound. These sounds can occur if the trim is worn out and rubbing against the window.
To replace your Door Belt Molding (Right, Rear), you first have to remove the old molding. To do this, begin by rolling the window all the way down and gently removing the inner door panel. Once you've removed the panel, carefully pry away the old molding from the door frame. Your Nissan's Door Belt Molding (Right, Rear) may be held on using metal clips. If it is, you may require a specific tool to pry open the clips without damaging other components of the vehicle. Once the old molding is removed, firmly push the new Door Belt Molding (Right, Rear) in place and make sure that the window is able to roll all the way up and down. Once you've ensured the molding is installed and the window rolls up and down, reinstall the interior door panel. Head to an authorized Nissan service center for help with professional installation.
Does the Door Belt Molding (Right, Rear) on your Nissan need to be replaced? Purchase from Nissan Parts for new, genuine Door Belt Molding (Right, Rear). Genuine Door Belt Molding (Right, Rear) is custom designed, fitted, and tested for durability for your model and trim.
This Body, Interior and Trim Door Belt Molding (Right, Rear), 82820ET000 fits your Nissan Sentra. See the What This Fits tab for more information.
MOULDING-REAR DOOR OUTSIDE,RH
Fits Sentra