The Door Belt Molding is a section of trim around the bottom of the door window that helps keep water, dirt, and other debris from getting between the window and the door panel. Door Belt Molding is often made of either plastic, chrome, or rubber. If the Door Belt Molding is damaged or missing, water may leak inside the door panel, potentially causing damage to your Nissan. Make sure you replace old or damaged Door Belt Molding with a new Door Belt Molding from genuine Nissan Parts.
After some years, your vehicle's Door Belt Molding can become brittle or worn and crack. Additionally, harsh elements like heavy rainfall, snow and ice, road salt, and UV rays could all potentially damage your Door Belt Molding.
Does your Nissan need new Door Belt Molding? Perform a visual inspection to check. You might see small cracks on the edges of the trim or it may feel brittle or look discolored. Additionally, roll the windows up and down, and listen for a squeaking, squealing, or chattering sound. These sounds can occur if the trim is worn out and rubbing against the window.
When replacing the Door Belt Molding on your Nissan, start by removing the old molding. Do this by rolling the window all the way down and gently removing the inner door panel. Once you've removed the inner door panel, carefully pry the old molding up and away from the vehicle. The existing trim may be secured to the door using metal clips. If this is the case, you might need a certain tool to pry open the clips without damaging other parts of the door frame. With the old molding removed, snap the new Door Belt Molding into place and make sure the window rolls up and down smoothly. With the new molding properly installed, replace the inner door panel. For professional help with installation, visit your nearest authorized Nissan service center.
Do you need to replace your Nissan's Door Belt Molding? Purchase from Nissan Parts for new, genuine Door Belt Molding. Our Door Belt Molding is custom fitted, designed, and tested for durability for your Nissan model.
This Body, Interior and Trim Door Belt Molding, 828213SG0A fits your Nissan Sentra 2013-2018. See the What This Fits tab for more information.
MOULDING-REAR DOOR OUTSIDE,LH
Fits Sentra (2013 - 2020)