- Located between the fender and the tire
- Helps shield your vehicle from small rocks and other road debris
- Replace when cracked or broken
The fender on your Nissan is designed to provide protection for the wheels and undercarriage components from flying debris, shield nearby people or other vehicles from rocks and pebbles that might deflect from your moving tires, and minimize damage to your vehicle in the event of a minor collision.
On quite a few Nissan models, the fender consists of multiple components, one of which is the Fender Splash Shield (Right, Front). Very often, the Nissan fender splash shield can be found inside the wheel well, and sits between your tire and the rest of the fender. Fender splash shields are custom designed for specific fitment within your vehicle: passenger-side front, driver-side front, passenger-side rear, and driver-side rear. They're also made for use in specific Nissan years and models.
Due to their positioning within your wheel well, the Fender Splash Shield (Right, Front) can be the first layer of protection against flying rocks or debris. For instance, if a tall SUV drives beside your Nissan and its tires send a rock straight toward your wheel well, your trusty Fender Splash Shield (Right, Front) can stop the object from affecting the brakes, headlight or tail light assemblies, or undercarriage. Additionally, the shield can offer protection for those parts from weather, which could slow damage or corrosion.
Over time, when exposed to moisture, rain, ice, and road salt, your Nissan Fender Splash Shield (Right, Front) can degrade, losing the protection it offers to the undercarriage of your vehicle. Additionally, it may break or detach if you scrape a curb or drive over a sizable pothole. A broken Fender Splash Shield (Right, Front) leaves that side of your vehicle exposed, and it will probably make a flapping or grinding noise if a broken piece is pushed against the tires.
But, the good news is that replacing any of your Nissan's fender splash shields is inexpensive and simple to do. You want a new Fender Splash Shield (Right, Front) that fits your Nissan seamlessly, so it's recommended that you buy a genuine OEM part from Nissan directly. Depending upon what model and year you have, the steps for installation can vary a bit. In most cases, all you need is the correct fasteners, a screwdriver, and your vehicle owner's manual.
You'll start by allowing your car to cool down for several minutes. Then, remove the clips and bolts that hold the old fender shield. If you'll be reusing the same ones, stash them in a safe place until you need them again (typically, it's better to go ahead and buy new ones, just in case the old components are worn out). Dry fit the new Fender Splash Shield (Right, Front) by holding it in place, ensuring any rivets and holes line up the holes on your fender. After you've aligned everything, screw or clip the Fender Splash Shield (Right, Front) into place and secure it! For professional installation, stop by a local Nissan dealer or authorized service center.
With a little bit of time and an OEM replacement Fender Splash Shield (Right, Front), you and your Nissan can hit the road again with confidence! Buy top-quality Nissan fender splash shields and automotive accessories for your Nissan 350Z today. Click on the What This Fits tab for more info.
PROTECTOR-FRONT FENDER,FRONT RH
Fits 350Z